follow us on PIR Sensor Facebook You Tube Video

PIR Motion Sensor For Lights

PIR Motion Sensor For Lights, Model No. HC - 7E

PIR Motion Sensor For Lights, Model No. HC - 7EPIR Lights Stand Alone Type

220 VAC Mains (Upto 1000W Incandescent) (300W Fluorescent Max.)

General Information

Motion sensor is a fully automatic indoor and outdoor security/courtesy light controller capable of controlling up to 1000W incandescent or 30W x 10 fluorescent of lighting. At night, the built in passive infrared (PIR) motion sensor turns on the connected lighting system when it detects motion in its coverage area. During the day, the built in photocell sensor saves electricity by deactivating the lights.

An adjustable time lets you select how long the light stays on after activation. The LITE adjustment determine at what light level the lighting system will start operating when you set the motion sensor to automatic mode,

Download PDF

Features

  • Wall Mount Suitable
  • Weatherproof - IP44
  • Time & LUX Adjustment
  • Patented Modern Design
  • Automatic Operation
  • Saving of Electricity

Applications

  • Car Park
  • Drive ways
  • Stair ways
  • Entrances
  • Corridors
Specification
Power Requirement AC 220 ~ 240V / 50Hz
Lighting Load Max 1,000W Incandescent or Max 300 W Fluorescent
Detection Angle
Up to 120° at 20° C
Detection Distance Min. 14M at 20° C
Swiveling Angle Horizontal 70° Vertical 35°
Mounting Height Recommended at 1.8 ~ 2.0M (5.9 ~ 6.6 Ft) Wall Mount
Wall Switch Control
On / Off
Sensor Operation Auto
Time Adjustment From ( 10 ± 5) sec. to ( 4 ± 1) minutes
Lux Adjustment
Approx. 0 ~ 1,000Lux
Operating Temperature -20° C ~ +40° C
Warm Up Time About 1 min
Protection Class II
Protection Degree IP44